目的
This Technical Note explains how xpa works with the different types of HASP protection (local device and network license manager), what needs to be installed, and how to configure the environment.
説明
Licenses
There are three types of xpa license protection:
Network 窶・A special broadcasting mechanism is used to count the number of used license seats.
Software 窶・The FlexLM license server counts the licenses.
Hardware 窶・Along with a license manager (from Aladdin) a HASP device is used; either a USB device or a parallel dongle.
The type of protection is defined in the P (protection) parameter in the license. The P parameter can have one of three values:
N 窶・network
S 窶・software
H 窶・hardware
For example:
What to Install
On each client that will use a HASP device (either locally or network) a HASP device driver is required. When a local device is used this is the only required component.
When a network device is going to be used you must install the NetHASP license manager (required) and the Aladdin monitor (recommended) on the server.
All three hardware protection devices are available from the xpa installation:
These items are also available on the Aladdin Website (additional details are provided on the last page of this Tech Note).
HASP License Manager
The license manager is responsible for matching the available licenses (from the HASP device) with the connections to the end-user.
To start the license manager, you can either follow the path shown below:
Or, double-click the tool窶冱 icon in the tray.
The following screen will appear:
Aladdin Monitor
The Aladdin Monitor application monitors the connections to the server.
Once a workstation is connected to the server the screen should look like this:
The monitor displays how many workstations are connected to the server, the workstation窶冱 address and hostname, the network protocol used, and the connection timeout.
Aladdin DiagnostiX
Another application which can be used is Diagnostix, which helps to check the device itself and the USB / Parallel ports.
If there is any physical problem with the device or with the connection to the computer this tool will detect it.
Configuration
There are two ini files that need to be configured, the Magic.ini and Nethasp.ini files.
In the Magic.ini file, which is the xpa ini file and accessible from the xpa shortcut, specify the LicenseFile (location of the license file is supplied to the customer) and LicenseName (the purchased license) values.
The Nethasp.ini file specifies the network details of the server, such as the address and network protocol.
It should be placed in the home directory of xpa, which is the directory specified in the Start In parameter of the shortcut.
The following is an example of such a file, where the network protocol is TCP_IP and the server窶冱 address is 10.1.11.77.
All the parameters and 説明s can be found in the examples on the Aladdin Website.
Additional Information
Additional information can be found on the Aladdin Website.
Download the HASP device driver
Download the NetHASP license manager
Download the HASP Diagnostics tool
Download the NetHASP monitor tool
Other items available for download are Nethasp.ini examples and the HASP documentation.